Shenzhen Homk Telecom Tech Co., Ltd.

Fiber Interferometer(HK-LY)


3D-Mesh diagram and analysis Fiber Interferometer(HK-LY)

The Fiber Interferometer used to measure radius of curvature, Apex offset, Fiber Height and polishing angle, key error of APC connector, in the meantime, show the topography of the connectors and fiber ends directly and clearly.

The main parts of include fiber interferometer, Lenovo table business computer and software package. Fiber Interferometer adopt 650nm high power LED Light source, which ensure user get clear interference image.

This fiber interferometer offers two kinds of chucks (2.5mm universal &1.25mm universal), with which user can test almost all kinds of connecters. 2.5mm universal used to measure FC/PC. SC/PC. ST/PC, E2000/PC, DIN, FC/APC, SC/APC kinds of connectors, 1.25mm universal used to measure LC/PC, MU/PC, LC/APC kinds of connectors, and you don't need to replace chucks and calibrate when you transfer between APC and PC connector mesurement, only turning "angle adjuster" to relative angle is ok, very convenient to operate.
Our software has features of accuracy, high repeatability and convenient operability. Before initial test, user should calibrate the unit first.

The fiber interferometer is very easy to calibration for this fiber interferometer. When landing calibration interface, turning six points averagely and measuring after focusing accurately, then click "ok" button, fiber interferometer will be automatically calibrated. You don't need to move hard device by yourself, as the software will calibrate inner settings automatically.

Then user can start measurement, only click "measure" button can finish one test, the test result and six historical records will be shown right under the interface, user could decide to save the record or not. If yes the data will be saved in excel format, and the fiber interferometer will judge the result qualified or not automatically according to user's criteria or defaulted criteria. In the meantime, the topography of the fiber or connector will be shown on the screen by 3D mesh diagram as well as contour diagram and surface roughness diagram.

The fiber interferometer Features
1 High repeatability, accuracy.
2 Convenient hardware and software operability.
Don't need to change chucks when transfer between APC and PC connecter measurement.
When calibration, software will calibrate automatically, user don't need to move the unit.
3 With patent, easily fasten chucks, Unique APC Fluctuate locate technology made the measurement never More precisely.
4 3D-Mesh diagram and analysis chart directly reflect fiber or connecters details.
5 Test report and data will be saved in excel format, easy for document management and print out.
6 Absolutely competitive price.

Simple and User Friendly Interfaces and Excellent 3D Images

The software of HK-LY is simple and user friendly, you can change the language within the software. It provide many endface rebuild method such as 3D, 2D, plot to assist the engineers about the process. The test reports and data are generated automatically for analyzing and tracing.

interfaces                               3D

Bare Ferrule Measurement

Measuring Radius of Curvature(ROC)、Apex Offset and Roughness (Ferrule Ra and Ferrule Rq).

ferrule                                ferrule



 Bare Fiber Measurement


interface7                               bare fiber

 Flat Polishing Measurement



Fiber height8nm 
Apex offset2um 
Fiber height12nm 
Apex offset5um 
Working Temperature— 10— 30º C
Zoom time10X
Power supply12V
Dinmensions44cm*22.5cm*17.5cm(L * W * H)

Send Inquiry





(All * must be filled in)

[ Previous: ]
[ Next: ]