Shenzhen Homk Telecom Tech Co., Ltd.

Fiber Polishing Machine(HK-30M)


HK-30M CE Fiber Polishing Machine With Two CHina Motors & Gearing Working.

01. It can process various optical fiber connectors: LC / UPC, LC / APC, FC / UPC, FC / APC, SC / UPC, SC / APC, St / UPC, MTRJ, MT / PC, MT / APC, E2000

02. Four corner pressure mode, good stability, time compensation function

03. Speed control, speed range is 30 ~ 160rpm. Slow start function

04. The maximum grinding time can be shortened to 1 / 2 of the original

05. Strong load capacity, more than 48 SC optical fiber connectors can be grinded

06. Modification of grinding parameters under password control to ensure that the correct grinding process is not changed at will

07. All running materials of the grinder have been heat treated and have a long service life

08.The grinding program is controlled by single chip microcomputer, which can realize the precise control of grinding time and grinding process

09. Double safety TN-S grounding system and leakage protection switch to protect the operator's safety to the greatest extent

10. The unique setting function of the life compensation of the grinding plate can realize the strict control of the grinding plate cost and the high quality consistency at the same time

Performance characteristics:

1. Four corner pressure double motor grinder, time compensation function

2. Adjustable speed control, grinding parameters preset storage

3. Speed range 10-90rpm, slow start function

4. The grinding time is reduced to 1 / 2 of the original

5. Strong load capacity, grinding more than 48 SC connectors

Pressure way4 coil springInsert Loss 0.3 dB (SM)
0.2 dB (MM)
polishing capacity(max)SC, FC, ST: 20, 48 units LC: 24, 48unitsReturn Loss50 dB (PC)
60 dB (APC)
Polishing connector typeFC, SC, ST, LC, MU, MTP, MPO, MTRJ and so onRadius10~25mm 
Motor speed120rpm rotation, 2rpm revolutionOffset50 μ M 
Dimension230*230*255mmUnder cut50nm 
Film size5' 'Repeatability  0.1dB 
Weight24KGInterchangeability0.2 dB 
Input voltage100-120VAC, 50/60Hz or 220-240VAC, 50/60HzWorking Situation Temperature  -10— +40º C
Polishing cycle2.83minsHeavy punch500g or 250g 
Polishing chassis diameter130mm 

Polishing time setting0-3min

Counterweight pressure  2.1~3.6kgf/cm 

Time Range0-300S

Polishing Time 2 min. (quick assembly type)

3-4 min. (standard connectors)

Pressure Range0~5kg 

Precession Speed1.5rpm

Send Inquiry





(All * must be filled in)

[ Next: ]