Shenzhen Homk Telecom Tech Co., Ltd.

Fujikura Fusion Splicer(FSM-60S)

Details

Fujikura FSM-60S Fusion Splicer


Fujikura FSM-60S Fusion Splicer, 4.1" color screen, Standard accessories, including cleaver CT-30A. English menu...

Fujikura FSM-60S Fusion Splicer Features:
1 The Fujikura FSM-60S fusion splicer rugged construction providing shock, dust and moisture resistance
2 The Fujikura FSM-60S fusion splicer has dual monitor position with automatic image orientation
3 This Fujikura FSM-60S fusion splicer is automatic arc calibration and fi ber identifi cation
4 User-selectable fiber clamping method - sheath clamp or fiber holders
5 Auto-start tube heater feature
6 Fujikura FSM-60S fusion splicer is Color LCD display with anti-refl ective coating for excellent visibility in bright sunlight
7 Simultaneous battery charge and splicer operation Fonsun Technology
8 Long life battery (up to 160 splice/heat cycles per charge)
9 Detachable work table incorporated into the transit case
10 Data and video download software included; Software upgrade available via the internet
11 Green friendly-RoHS and WEEE compliant

Applicable FibersSM(ITU-T G. 652), MM (ITU-T G. 651), DS (ITU -T G. 653), NZDS (ITU-T G. 655)
And other single mode fiber including ITU-T G. 657 fiber
Attenuation splicer functionIntentional high splice loss of 0.1dB to 15dB (0.1dB step) can be made for an
In-line fixed attenuator
Fiber countSingleTube heater / Heating TimeBuilt-in tube heater with 30 heating modes. Typical 30 seconds with FP-03 slee
Cladding Diameter80μ M to150μ MApplicable Protection Sleeve60mm, 40mm and Fujikura FPS01 series.
Coating Diameter100μ M to 1, 000μ MStorage of Splice ResultThe last 2000 results to be stored in the internal memory
Fiber setting and cleaved lengthSheathe clamp A (standard): For coating dia. Up to 250um (8 to 16mm cleave)
 
Tension Test1.96 to 2.25N
Coating diaover 250um (16um cleaver)Operating Condition  0 to 5, 000m above sea level, 0 to 95%RH and -10 to 50 degC and up to 15m/s wind velocity, respectively
Sheathe clamp B (option)For coating dia. Up to 1000um (8 to 16mm cleave) Storage Condition  0 to 95%RH and -40 to 80 degC respectively
Sheathe clamp C (option)For 900um dia. Loose tube fiber (8 to 16mm cleave)Battery-20 to 30 degC for long term
Fiber holder (option)FH-60-250 and FH-60-900 (10mm cleaver)Dimensions136W x 161D x 143H (mm) / 5.3W x 6.3D x 5.6H (inches)
Splicing Modes100 preset and user programmable modesWeight2.3 kg (5.1 lbs) with AC adapter ADC-13; 2.7kg with BTR-08
Typical Average Splice Loss0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS(Measured by cut-back method relevant to ITU-T and IEC standards)
 
 
Viewing MethodTwo CMOS cameras and 4.1 inch TFT color LCD monitor
Return loss> > 60dBFiber view and Magnification300X for single X or Y view, or 187X for X and Y view
Splicing TimeTypical 9 sec. With SM FAST, 10sec. With SM AUTO and 13sec with AUTOPower SupplyApplicable voltage from 100 to 240V AC or 10 to 15V DC with ADC-13, 13.2V DC with BTR-08 battery
Modes with standardSM (ITU-T G. 652)No. Of Splice Cycles with batteryTypical 160 cycles (splice / tube heat) with BTR-08
Splice Loss EstimateAvailableElectrode life2500 arc-discharges
TerminalsUSB 1.1 (Mini-B type) connector for PC communication.6-pin Mini-DIN connector for HJS-02/03 or SH-8 power supply 

Send Inquiry

*

*

*

*

(All * must be filled in)

[ Previous: ]