Shenzhen Homk Telecom Tech Co., Ltd.

Pneumatic Fiber Polishing Machine(HK-9000K)


Pneumatic Fiber Polishing Machine HK-9000K

HK-9000K can process each kind of standard fiber optic connector: FC, LC, SC, ST, MT-RJ, MPO, E2000, SMA905, FA etc. This fiber polishing machine is pneumatic fiber polishing machine, let the speed and pressure is uniform, polishing effect is better, percent of pass is very highest. The pneumatic fiber polishing machine has itself fiber polishing fixture, it more special.

The HK-9000K use the alloy gear drive, the polishing fixture diameter reaches 127mm, the performance is stable

The compression, the pneumatic fiber polishing machine unloading and the replacement of jig and polishing film is convenient and quick

Our pneumatic fiber polishing machine is processing quality is stable, percentage of products sent back for repair is low

The machine's production efficiency is high (may several machines compose production lines)

This polisher using the consumable material can be saved, cost is low

It's speed is controllable, can be adjusted as necessary (0~200rpm)

This machine can grind other similar products

The outward appearance design is more succinct and natural

Pressure wayby one hammerInsert Loss0.3 dB (SM)
0.2 dB (MM)
Polishing capacity(max)SC, FC, ST: 12units LC: 16unitsReturn Loss50 dB (PC)
60 dB (APC)
Polishing connector typeFC, SC, ST, LC, MU, MTP, MPO, MTRJ and so onRadius  10~25mm 
Motor speeed170rpm rotation, 2rpm revolutionOffset50 μ M 
Dimension200*400*500mmUnder cut  50nm 
Film size4' 'Repeatability  0.1dB 
Weight20KGInterchangeability  0.2 dB 
Input voltage100-120VAC, 50/60Hz or 220-240VAC, 50/60Hz
Polishing cycle2.5mins
Polishing chassis diameter112mm 
External diameter of bottom plate126mm
Inside diameter of bottom plate112mm
Polishing chassis beating≤ 5um 
Polishing time setting0~999.99s 
Counterweight pressure  2.1~3.6kgf/cm 
Heavy punch500g or 250g 
Stress arm4 phase shifter

Send Inquiry





(All * must be filled in)

[ Previous: ]
[ Next: ]