Automatic Touched Color Screen Fiber Polishing Mac

Automatic Touched Color Screen Fiber Polishing Mac
产品编号: Automatic Fiber Polishing Machine(HK-G55A) 产品名称: Automatic Touched Color Screen Fiber Polishing Mac
产品详细介绍:  

Automatic Full-Color Touch Screen Fiber Polishing Machine(HK-G55A)

Automatic Full-Color Touch Screen Fiber Polishing Machine(HK-G55A)
HK-G55A is specialized in manufacturing MT, MTP, MPO, MTRJ, E2000 etc conenctor. It is programmable, you can setting time, speed, polishing film, polishing fixture etc before you work.

HK-G55A Automatic Full-Color Touch Screen Fiber Polishing Machine is Low rotation speed start, pressure and speed to rise gradually, reduce fiber scratch, prevent ferrule fracture, and polishing quality stable core, lower noise. For more, Password Protection of system configuration, process configuration and Process transfer modules.

The operation is simple, reliable, consumables save, polishing cost be low. This HK-G55A Automatic Full-Color Touch Screen Fiber Polishing Machine can be independent production or form a single assembly line production. Robust Design uses the highest-quality materials.

HK-G55A is applicable for the following materials and models:

Insert material: ZrO2(Zirconium dioxide)
Insert diameter: 2.5mm, 1.25mm, etc.

HK-G55A Automatic Full-Color Touch Screen Fiber Polishing Machine is used to grind insert products with different diameter, or different heads, such as
Plane, tapered plane, etc.

Below is the HK-G55A Automatic Full-Color Touch Screen Fiber Polishing Machine function instruction:
1. Powerswitch
Control power supply of machine to switch on/off.
2. PLCHMI
Control speed, time, pressure, etc. Of machine.
3. Bottom disc
Allow revolution and rotation at the same time.
4. Center seat
Fix polishing jig.
5. Pressurepush rod
Apply pressure on polishing jig.
6. Rotating stand button
Control the installation of polishing jig.
7. Water storage
Clean polishing jig and rubber mat.
8. Suspension part
Adjust suspension height of optical fiber.

Pressure way by air pressure Insert Loss 0.2 dB (SM)
0.2 dB (MM)
polishing capacity(max) SC, FC, ST: 12, 16, 20units LC: 16, 24units Return Loss 50 dB (PC)
60 dB (APC)
polishing connector type MTP, MPO, MTRJ, E2000, FC, SC, ST, LC, MU, and so on Radius   10~25mm 
motor speeed 2.5 Rotation: rpm Revolution: 0-400rpm Offset 50 μ M 
dimension 200*400*500mm Under cut   50nm 
film size 5' ' Repeatability   0.1dB 
weight 45KG Interchangeability   0.2 dB 
Input voltage 100-120VAC, 50/60Hz or 220-240VAC, 50/60Hz    
polishing cycle 1.5mins    
Polishing chassis diameter 127mm     
External diameter of bottom plate 200mm    
Inside diameter of bottom plate 127mm    
Polishing chassis beating ≤ 5um     
Polishing time setting 0~999.99s     
Counterweight pressure -/+5g    
Heavy punch 500g or 250g     
Stress arm 5 phase shifter

返回首页
在线客服