Shenzhen Homk Telecom Tech Co., Ltd.

Adjustable Polishing Machine(HK-19K)


Adjustable Fiber Polishing machine HK-19K

HK-19K can adjust speed and setting time.

1. This machine can FC, SC, ST, LC, MU, D4, E2000, MTP, MT-RJ etc, this fiber polishing machine is very applicable to mass production with high production efficiency. Can Polish 18, 20, 24, 32, 40 etc conenctors. This fiber polishing machine usually a production line could be equipped with 3 center polishing machine, each finish 9um, 3um, 1um polishing progress. Wirenet provide polishing machine with compact design and long durability.

2. It can display polishing speed and polishing times, making the process easier to control quality.

3. The polisher comply with IEC standards can produce geometric face.

4. The grinder adopt planetary orbit by way of Research Mo.

6. IPC using the new fixture(each mortise, Independent compression) technology allows higher passing rate of industrial production, and is willing to either one or 24, 32, 40 ground connector, ground effects the same operation and high flexibility.

7. Treatment with high-quality stainless steel had to make the machine to maintain a very high accuracy and the Availability.

Pressure way4 coil springInsert Loss 0.3 dB (SM)
0.2 dB (MM)
Polishing capacity(max)SC, FC, ST: 20, 48 units LC: 24, 48unitsReturn Loss50 dB (PC)
60 dB (APC)
Polishing connector typeFC, SC, ST, LC, MU, MTP, MPO, MTRJ and so onRadius10~25mm 
Motor speed80rpm for rotation, 1rpm for revolutionOffset50 μ M 
Dimension230*230*255mmUnder cut50nm 
Film size5' 'Repeatability  0.1dB 
Weight23.5KGInterchangeability0.2 dB 
Input voltage100-120VAC, 50/60Hz or 220-240VAC, 50/60HzWorking Situation Temperature  -10— +40º C
Polishing cycle2.83minsHeavy punch500g or 250g 
Polishing chassis diameter130mm   
Polishing time setting0-3min  
Counterweight pressure  2.1~3.6kgf/cm   
Time Range0-300S  
Polishing Time   2.5 min for quick-Assembly type;  
 4-5min for standard type  
Pressure Range0~5kg   
Precession Speed1.5rpm

Send Inquiry





(All * must be filled in)

[ Previous: ]
[ Next: ]