Shenzhen Homk Telecom Tech Co., Ltd.

Colorful Screen Polishing Machine UTouch-30S

Details

Colorful Screen Polishing Machine UTouch-30S



Features:

1. UTouch-20S Upgraded version,Touch screen design larger, easy to operate.
2. The connector is selected and the grinding program is automatically selected.
3. High power, DC brushless motor, high torque. Ordinary motor is 3 times larger
Equipment parameters 1. Size: 280 (L) * 400 (W) * 280 (H) MM. 2. Machine power: 95W3. Large motor speed: 0 ~ 175 rpm 4. Small motor speed: 0 ~ 30 rpm 5. The total weight is 25Kg

4. Be suitable in LC/UPC, LC/APC, FC/UPC, FC/APC, SC/UPC, SC/APC, ST/UPC, MTRJ, MT/PC, MT/APC and E2000 and other types of connector
5. Speed regulation control, speed selection scope is 30 ~ 160 RPM. Slow start function.
6. The polishing time can be reduced to the original by 1/2
7. Load ability: Allow more of 48 PCS fiber optic connectors
8. The password keeps all polishing parameter not to modify, make sure you have the correct polishing process will not be changed.
9. The Full-Color Touch Screen Programmable Fiber Polishing Machine using heat treatment all materials, and long service life
10. Polishing process by microcomputer control, may realize the polishing time and process more be precise.
11. Double insurance TN-S grounding system and leakage protection switch, to an extreme protect operator
12. Unique compensation setting function, it not only strictly control polishing film costs least, but also maintain high quality consistency.

 

Parameters:

Item       Index
Power source
Voltage : FrequencyAC 110-120V: 50Hz/60Hz Or AC 220-240V: 50Hz
Power waste80VA
Drive Units
Big motor (rpm)15W,Including transmission
Small motor (rpm)6 W,Including transmission
Fanφ90mm
Operation unit
Control timeSet the growth time of 0.1mins ,maximum time is 3min the middle button is power switch, right button is the start switch
Power switch
Timing switch
Pressure unit     4 coil spring
Pressure way
Polishing             
The least grinding ferrule abrasive sheet                     level grinding by polishing pad and polishing by PC connector1 - 10 connector
Outer diameter:127mm                                       
Glass pad
Synthetic   rubber pad
Performance         
Polish PC connector                                                       Four-step, 1.4 to 2.4 minutes
Polish APC connectorFive-step, 3.0 to 5.0 minutes
DimensionW230 × D230 × H350 mm
Weight 25 kg



Send Inquiry

*

*

*

*

(All * must be filled in)

[ Previous: ]
[ Next: ]