Shenzhen Homk Telecom Tech Co., Ltd.

Fiber Polishing Machine (HK-30X)

Details

             FIBER POLISHER HK-30X

It can polish max 72 core heads at the same time, which is very suitable for mass production models. The grinding fixture is fixed at four points, and the grinding pressure is determined by the pressing amount of the elastic pad. The operation is simple, the product processing accuracy is high, and the consistency is very good. Strong compatibility. In the development and design stage of the equipment, the current situation of the use of enterprise equipment has been fully considered, and its consumables (grinding film) and fixtures adopt the widely used 127mm and four corner positioning and pressure working mode. The fixture can be interchanged with the equipment of other manufacturers without any adjustment.


Strong compatibility

In the development and design stage of the equipment, the current situation of the use of enterprise equipment has been fully considered, and its consumables (grinding film) and fixtures adopt the widely used 127mm and four corner positioning and pressure working mode. The fixture can be interchanged with the equipment of other manufacturers without any adjustment.


Wide range of application

The equipment has small volume, no need to be equipped with any external equipment, less land occupation and stable production.


Easy to operate

It is convenient to simplify the production process and enhance the work efficiency. The fixture is easy to clean and replace.

Pressure way4 coil springInsert Loss 0.3 dB (SM)
0.2 dB (MM)
polishing capacity(max)SC, FC, ST: 20, 48 units LC: 24, 48unitsReturn Loss50 dB (PC)
60 dB (APC)
Polishing connector typeFC, SC, ST, LC, MU, MTP, MPO, MTRJ and so onRadius10~25mm 
Motor speed120rpm rotation, 2rpm revolutionOffset50 μ M 
Dimension230*230*255mmUnder cut50nm 
Film size5' 'Repeatability  0.1dB 
Weight24KGInterchangeability0.2 dB 
Input voltage100-120VAC, 50/60Hz or 220-240VAC, 50/60HzWorking Situation Temperature  -10— +40º C
Polishing cycle2.83minsHeavy punch500g or 250g 
Polishing chassis diameter130mm 

Polishing time setting0-3min

Counterweight pressure  2.1~3.6kgf/cm 

Time Range0-300S

Polishing Time 2 min. (quick assembly type)

 3-4 min. (standard connectors)  
Pressure Range0~5kg   
Precession Speed1.5rpm

Send Inquiry

*

*

*

*

(All * must be filled in)

[ Next: ]