Automatic Armour Cable Cutting Machine (HK-62K Plus)

1. The HK-62K Plus has high automation: Auti running for full process from raw cable to final section.
2. TheHK-62K Plus has high length accuracy: Meter wheel to count length, no length deviation from cable twist, slip during feeding. Automatic cable cutting machine by high precision measurement of compensation to measure.
3. The HK-62K Plus has high efficiency: Less than 15 seconds for typical 10m.
4. The HK-62K Plus is easy operation: Single button to start/stop/pause running. Two separated instruments for length and quantity set up. Performance manual buttons down all kinds of movements, convenient for specific assignment.

5. This HK-62K Plus is stable performance: Robust mechanical structure intellectual controller for super reliable movement.
6. The HK-62K Plus machine is efficient cut: Patented desugn for super reliable and complete trim of super fine fiber.
7. Correction function: Convenient for the length of the staff college checked.
8. Protecting fiber: Maxmun reduce the work process of stress on the optic cable. (vertical and horizontal cut up)
9. The automatic Armour cable cutting machine is intellectual control: Intellectual software to control and monitor operation
10.Weight:120KG

Technical parameter

General technical conditions

1.  for cable ：0.9~phi phi6.0mm.

2. cutting length 1~450m。

3. the appropriate weight is less than 42kg

4. cut cable precision：100M * 3 per thousand

5. cable speed 0.1~1.6M/s

6. wire wheel adjustment range：90~phi phi120mm

7.  device size:

       host: length*width*height=

       seat: length *width*height=

       Cable laying machine: length*width*height=

8.  power supply：220VAC/ 50Hz

9.  gas source：0.4~0.6 MP/CM2

10. power：1450W 

11. temperature:  0℃~60℃

Storage conditions

A.  Ambient temperature is intermediate:  -10℃~50℃

B.  Relative humidity:  15%~85%

C.  Vibration :  1.0g  5~100Hz   45min

Model:HK62K Plus