Shenzhen Homk Telecom Tech Co., Ltd.

Fiber Optic Inspection Microscope HK-400P For PC Type

  • Model No.: Fiber Optic Inspection Microscope HK-400P For PC
  • Products Category : Fiber Microscope
Details

Fiber Optic Inspection Microscope HK-400P for PC Type


The fiber microscope is the table model used in inspecting the fiber optic connector end surface quality. It has high definition of inspection and is convenient and fast operation, precise and highly effective. The image is clear and bright. It saves the time, reduces the cost. It has strong function of applications. It is your end of the optical fiber connectors detection of measuring tool. Ideal through the monitor display optical fiber connectors end of the image, and other fiber microscope, compared with common observation, can be in uniform inspection standard, which is beneficial to the related training and Technical personnel. 

Principle: 
Put the fiber connector into fiber microscope adapter, LED light will directly Irradiate fiber and ceramic ends, through the optical amplifier, the working life is long, the internal LED illumination light bulb life for 100000 hours, the interior does not have the user to be possible to service the part. Security laser, in sets at the CCD camera(not human eye) watches the optical fiber end surface, even if inspects is transmitting the laser optical fiber end surface, also does not have the security problem transfer Images to CCD, CCD image amplifier, video signals, and turn to transmission to the corresponding monitors, on the monitors can get, CCD camera, including monitoring device. 

The fiber microscope suits the scope to be broad, basically may inspect any fiber optic connector. And it can offer pre-centralized positioning, the core image always demonstrates in the central position. It is human body engineering design, suits specially in the fiber optic connector manufacturer.

Instruction: 
1. POWER switch / indicator 
When the power switch is turned on, the indicator lights; When the power switch is turned off, the indicator goes off. 
2. CONTRAST Control 
The fiber microscope provides the proper contrast between the black and white portions of picture. 
3. BRIGHTNESS Control 
Determines the brightness of the picture and is adjusted in conjunction with the CONTRAST Control. 
4. V-HOLD Control 
When the picture roles up and down on the screen, adjust the V-HOLD Control until there is a single steady picture. 
5. H-HOLD Control 
When the picture has slanting horizontal bars, rotate the H-HOLD Control in either direction until a stationary picture is obtained. 
6. VIDEO IN Connector 
Connect to the video out of a camera or another monitor (For multiple connection), or a VCR 
7. VIDEO OUT Connector 
Connect the video input of another monitor or a VCR. 
8. IMPEDANCE Switch 
Set the 75 OHM position when only one monitor is used, or is used in the last one monitor of multiple connection. The other monitors should be set to HIGH position when connected to the VIDEO OUT connector. 
9. Power source input: AC 200V/240V 
10. The head- face detector including one magnifier and one monitor. 
400x, 200x, and 80x can be selected by this fiber microscope. Equipment with 2.5mm and 1.25mm adapter, MTRJ, and MT can be optional. Simple, economical and practical. Video display, clear image. 
11. This kind of fiber microscope has a good perfermance at good quality, all specifications according to international standard.

parameter

Interface

FC, SC, LC/PCE2000, MTRJ, MPO

Magnification

80x200x400x

Display Device

9 B& W display

Input Voltage

12V

Storage Temp.

-20— +60 degrees

Net weights

1.4 kg

Dimension

117mm x 79mm x 79mm

400X fiber optic inspection microscope with 8" LCD screen   
The WT-V-400XY video fiber microscopes utilize coaxial illumination to provide the user with a critical view of fine scratches, making them the ideal choice for factory post-polish, component assembly, and QC inspection of fiber connectors. WT-V-400XY include a video microscope, a video monitor, and a 1.25mm and 2.5mm universal adapter for viewing the most common types of connectors.         
In the normal viewing mode defects and debris are easily seen across the end-face, but  pressing the ScratchView button on the top of the microscope allows the user to repeatably see very faint scratches that are otherwise very difficult to detect. Microscopes are also sold as independentunits without monitors. 
Feature: 
Wirenet equiped the 400XY Video Fiber Microscope with brand new 8' LCD screen for output, which has more stable output and protect eyes. 
New type advantage: 
X, Y axis to adjust the focal length 
Convenient replacement adapter 
Convenient equipped with multiple core adapter 
Can equipped with MPO and MTRJ adapter 
Optional: 
only the microscope 
microscope and 8" LCD screen 
microscope and 10.4" LCD screen


Send Inquiry

*

*

*

*

(All * must be filled in)

[ Previous:HK-3000C ]
[ Next:Fiber Optic Inspection Microscope HK-200V For Vifi ]